Genesis ECM Programming & Cloning — Fort Pierce, FL

Fort Pierce Genesis owners — ECU Team Corp specializes in Genesis ECM programming, cloning, and repair. Bosch MED17.9.30, ME17.9.1, Kefico MT86, and MT38 — all ECM platforms covered. G70, G80, G90, GV70, GV80, Equus, Coupe — all models supported. Fort Pierce is 55-65 min north of our Florida lab. Ship your modules for 24-48 hour turnaround with return shipping included. Advanced ECU programming laboratory with 1-year warranty.

For Fort Pierce vehicle owners in St. Lucie County, our lab is reachable via Interstate 95 North in approximately ~60 min (north direction). We cover ZIP codes 34945-34982, including the Fort Pierce Inlet and Hutchinson Island neighborhoods. From the G70 to the GV80, Fort Pierce Genesis owners rely on our lab for GDI and ECM repair on Lambda II and 3.3T powertrains. We provide a prepaid shipping label so your ECM arrives at our bench quickly and returns within 48 hours.

Bosch MED17.9.30 — Genesis 5.0L V8

MED17.9.30 ECM Programming — Few Labs in USA Can Do This

MED17.9.30 Cloning — Used Module to Plug & Play

Full Calibration & Security Data Transfer

Genesis G80 5.0L & G90 5.0L (2018-2020)

RWD & AWD Models Supported

Same-Day Walk-In Service

Request MED17.9.30 Service

Bosch ME17.9.1 — Genesis 4.6L & 5.0L

ME17.9.1 ECM Programming & Cloning

Used ME17.9.1 — Clone to Plug & Play

Burned ECM Data Recovery

Genesis 4.6L (2009-2014) & G80 5.0L (2015-2020)

VIN Programming & Calibration

ECM Remanufacturing with OEM Components

Request ME17.9.1 Service

Kefico MT86 & MT38 — Genesis 3.8L

MT86 ECM Programming & Cloning

MT38 ECM Programming & Cloning

Genesis 3.8L Sedan & Coupe GDI (2009-2017)

G80 3.8L (2015-2017)

Used Kefico ECM — Clone to Plug & Play

1 Year Warranty on All ECM Work

Request Kefico Service

How Genesis ECM Service Works

Step 1 — Contact Us with Your VIN
Call (888) 541-6025 or fill out the form below. We identify your ECM type — Bosch MED17.9.30, ME17.9.1, Kefico MT86, or MT38 — and confirm the service needed.

Step 2 — Bring or Ship Your ECM
Walk in to our Florida lab or ship from anywhere. If replacing the ECM, send both the original and used replacement.

Step 3 — Diagnostics & Data Recovery
We diagnose the ECM on our bench simulator. Full calibration read, security data extraction, and firmware verification before any work begins.

Step 4 — Programming & Testing
The ECM is programmed, cloned, or repaired and bench-tested before delivery. Advanced diagnostics verify all systems.

Step 5 — Install & Drive
Programmed ECM is Plug & Play. Install in your Genesis — the vehicle starts without dealer programming. Same-day for walk-ins.

Why Fort Pierce Chooses ECU Team for Genesis

MED17.9.30 Specialists — one of the few labs in the USA that programs this ECM
Advanced ECU Programming Lab — verified expertise
All Genesis ECM Platforms — MED17.9.30, ME17.9.1, MT86, MT38
Same-Day Service — walk in or ship for 24-48hr turnaround
All Models — G70, G80, G90, GV70, GV80, Equus, Coupe
Used ECM? No Problem — buy from eBay or junkyard, we clone it
1 Year Warranty on all repair and programming work
No Dealer Required — Plug & Play results
Serving St. Lucie County Since 2015
Fort Pierce Customers Save Up to 60%

Fort Pierce is 55-65 min north of our lab in Florida. Drive in for same-day service or ship your ECM for 24-48 hour turnaround. We provide return shipping.

Yes. Ship or bring both ECMs — the original (even if damaged) and the used replacement. We clone all data — MED17.9.30, ME17.9.1, MT86, MT38 — all platforms. Fort Pierce customers in St. Lucie County can also drive in for same-day service.

Kefico MT86/MT38: from $600. Bosch ME17.9.1: from $1,170. Bosch MED17.9.30: from $1,580. Contact us with your VIN for an exact quote. Call (888) 541-6025 or fill out the form below.

Genesis ECM Services — Serving Fort Pierce & All South Florida

ECU Team Corp serves Fort Pierce and all of St. Lucie County from our Florida electronic laboratory at our Florida lab. Walk-in or ship your ECM for fast service.

More Genesis Services locations:

Palm Beach County: Florida · Boca Raton · Boynton Beach · Delray Beach · Jupiter · Lake Worth · Wellington

Broward County: Fort Lauderdale · Pompano Beach · Deerfield Beach · Hollywood · Davie · Plantation

Miami-Dade County: Miami · Kendall · Homestead · Aventura · North Miami · Coral Gables · Miami Gardens · Doral · Hialeah

Treasure Coast: Vero Beach · Port St. Lucie · Stuart

West Coast: Tampa · St. Petersburg

Genesis ECM service — call now: phone-receiver (888) 541-6025

Genesis ECM Services — Fort Pierce

Product Details