Audi Airbag Module Reset & SRS Crash Data Clear

Common Audi SRS Module Failure Patterns

Audi SRS modules (mounted under driver or passenger seats on most current models) frequently trigger after side-impact or even minor seat-mounted occupant detection sensor faults. The module stores all deployment events permanently in Bosch firmware. VAG-coding ties the module to VIN — replacement at dealer requires immobilizer matching at significant cost. Reset preserves all coding and original calibration on the customer's own module.

Already been to a Audi dealer and the light is still on?

Bring the module to us. We work at bench level: your original Audi SRS module is read, the crash data is cleared, and the same module goes back in your car — no VIN re-marriage, no new part to program.

Dealers and repair shops across South Florida send us modules directly.

• Crash data clearing + module testing included
• Walk-in service in Florida, or ship your module from anywhere in the US

Diagnostic Tools & Hardware

Scanner / diagnostic tool: VCDS / VAS 6154 / ODIS — we run VCDS as primary diagnostic tool plus direct bench EEPROM access. All Audi SRS coding (immobilizer pairing, transport mode, dealer adaptations) is preserved through our process. No re-coding needed at dealer after our reset.

EEPROM / chip: Audi/VAG SRS modules use Bosch microcontrollers paired with external Atmel or STMicro EEPROMs. Most common variants in our daily work: 95080 / 95128 (B6 / B7 chassis), 95320 (B8 / 8K chassis — A4, A5, Q5 generation), 95640 (current MQB platform — A3, A4 B9, Q5 facelift, Q7). We handle all variants from Audi 80 through current MLB / MQB platforms.

Supported Audi SRS Part Numbers (31)

If your part number is not listed, contact us — our database is updated regularly.

What We Clear on Audi SRS Modules

Our process removes all stored crash data and fault codes from your Audi airbag control module:

• Frontal impact crash data
• Side impact crash data
• Seatbelt pretensioner deployment codes
• All SRS DTCs (Diagnostic Trouble Codes)
• Hard-coded fault memory

Once cleared and verified, your original module is ready to reinstall — SRS light off.

Florida Audi Market — What We See Most

Florida Audi market: A4 (B7 / B8 / B9 chassis), Q5, Q7, A6, A3, A5, S4 — most volume on A4 and Q5. Many South Florida Audis are out-of-warranty by 5+ years, making dealer module replacement cost-prohibitive. Our reset on the customer's original module is the standard solution for post-collision SRS clearance in this market.

Service Process & Turnaround

Audi dealer replacement averages $1,800-$3,200 including coding labor at most South Florida dealerships. Our reset is $75 base + module-specific options, ready same-day for walk-in customers in Florida. Mail-in 24-48 hours with VIN-coding intact and SRS light cleared.