Mercedes TCM / EGS Transmission Module Specialists — West Palm Beach

Your Mercedes transmission is stuck in limp mode, won't shift, or shows a TCM fault code. The dealer quotes $3,000–$5,000 for a new module plus programming. ECU Team Corp offers a faster, more affordable solution. We program, clone, and repair Siemens VDO and Continental transmission control modules for all Mercedes-Benz, Sprinter, and Chrysler/Jeep vehicles. Same platform — the Siemens VDO conductor plate is used across all three brands. Walk-in same-day service at our West Palm Beach electronic laboratory. HP Tuners Advanced Certified.

TCM / EGS Cloning & Programming

Mercedes 7G-Tronic (722.9) TCM Cloning

Mercedes 9G-Tronic (725.0) TCM Programming

Sprinter 5-Speed NAG1 TCM Cloning

Siemens VDO Conductor Plate Data Transfer

Used TCM Virginization & Preparation

Plug & Play — No Dealer Visit Required

Request TCM Cloning

VGS / EGS Chip Tuning & Repair

EGS52 / EGS53 Chip Tuning — Shift Speed & Firmness

VGS (Variable Geometry Steering) Module Service

Conductor Plate Component-Level Repair

Speed Sensor & Solenoid Circuit Board Fix

Transmission Adaptation Reset & Relearn

1 Year Warranty on All TCM Work

Request TCM Repair

Vehicles We Service

Mercedes-Benz: C-Class, E-Class, S-Class, CLS, ML, GL, GLE, GLC, SL, CLK — all 7G/9G-Tronic

Sprinter: W906, W907 — 5-speed NAG1, 7G-Tronic

Chrysler / Jeep: 300, Grand Cherokee, Commander — NAG1 (W5A580)

Dodge: Charger, Challenger, Ram — NAG1 transmission

Same Siemens VDO platform across all brands — one lab handles all

Check Your Vehicle

How TCM Cloning Works

Step 1 — Send Us Your VIN
We verify your transmission type and confirm the correct TCM part number.

Step 2 — Bring or Ship Both Modules
We need the original TCM (even if faulty) and a used replacement with matching part number.

Step 3 — Data Transfer
We extract all adaptation data, gear ratios, VIN coding, and security information from the original. Everything is transferred to the replacement module.

Step 4 — Bench Testing
The cloned TCM is tested on our bench simulator to verify all solenoid circuits, speed sensors, and shift logic before delivery.

Step 5 — Install & Drive
Install the cloned module — the transmission operates normally with all learned shift patterns preserved. No dealer adaptation needed.

Why Choose ECU Team for TCM Service

HP Tuners Advanced Certified — verified transmission calibration expertise
Same-Day Service — walk in to our West Palm Beach lab
One Lab, All Brands — Mercedes, Sprinter, Chrysler, Jeep, Dodge — same Siemens VDO platform
Conductor Plate Specialists — component-level repair, not just module swaps
Used TCM? No Problem — we virginize and clone from any source
Bench Tested Before Delivery — every module verified on simulator
1 Year Warranty on all programming and cloning work
Save $2,000+ compared to dealer replacement

TCM cloning typically costs $800–$1,200 depending on the transmission type and vehicle. Contact us with your VIN for an exact quote.

The conductor plate is the electronic circuit board inside the Siemens VDO transmission module. It controls solenoids, reads speed sensors, and manages shift logic. Yes, we repair conductor plates at the component level — replacing failed transistors, capacitors, and sensor circuits.

Limp mode (stuck in one gear) is often caused by a failing conductor plate or TCM software fault. We diagnose the exact cause on our bench before recommending cloning, repair, or programming. Contact us with your VIN and fault codes.

Yes. Buy a used TCM with a matching part number from any source. We virginize it (remove the previous vehicle data), then clone your original data onto it. The result is a Plug & Play module for your vehicle.

Yes. The NAG1 (W5A580) transmission used in Chrysler 300, Jeep Grand Cherokee, Dodge Charger, and other vehicles uses the same Siemens VDO platform as Mercedes. We clone and program these modules in our lab.

No. A properly cloned TCM contains all your vehicle's adaptation data, VIN coding, and shift patterns. Install it and drive — no dealer programming or adaptation session required.

Mercedes TCM programming & cloning — same day: phone-receiver (888) 541-6025

Mercedes TCM / EGS Services

Product Details